EN
2
Important Information
• Before installing the cleaner, make sure the pool filter is clean.
• New plumbing lines should be flushed out before installing the cleaner.
• The Polaris
®
should not be used to remove plaster dust in new pools.
• Except when checking the wheel RPM, do not handle the Polaris
®
while it is operating.
• Always remove the cleaner before swimmers enter the pool.
• Disconnect the cleaner before cleaning or backwashing the pool filter. After cleaning, let the
filtration system run for at least five minutes before re-connecting the cleaner.
• Always remove the Polaris
®
from the pool before chemical shock treatments.
CAUTION: USE OF THE POLARIS
®
IN A VINYL LINER POOL
Certain vinyl liner patterns are particularly susceptible to rapid surface wear or pattern removal caused by objects coming into
contact with the vinyl surface, including pool brushes, pool toys, floats, fountains, chlorine dispensers, and automatic pool
cleaners. Some vinyl liner patterns can be seriously scratched or abraded simply by rubbing the surface with a pool brush. Ink
from the pattern can also rub off during the installation process or when it comes into contact with objects in the pool. Zodiac
Pool Systems, Inc. is not responsible for, and the Limited Warranty does not cover, pattern removal, abrasion or markings on
vinyl liners.
To Next Page
Loading...
