Polaris 3900 Sport Instructions For Installation And Use

EN
Congratulations on the purchase of your new automatic pool cleaner, and thank you for choosing
Polaris
®
. The Polaris
®
3900 Sport is designed to give you years of dependable and efficient
service.
Like most mechanical devices, it will require periodic adjustments, routine maintenance, and
the replacement of certain hardworking parts. Please have your cleaner checked
occasionally by your local Polaris
®
dealer or authorized service center.
Always insist on genuine Polaris
®
replacement parts. Non-Polaris
®
parts are not made to our
specifications. They may have an adverse effect on the operation of your Polaris
®
or may even
damage it.
For best results, the cleaner should be installed by a pool professional. For those with experience
and confidence in handling plumbing and mechanical equipment, installation is outlined in this
manual.
Polaris
®
3900 Sport Components
3
Introduction
1. SuperBag, (Double) All-Purpose Zippered Bag
2. Float
3. Cleaner body
4. Sweep Hose
5. Tail Sweep Pro
6. Feed Hose
7. Hose Floats
8. Back-up Valve
9. Feed Hose Connector
10. In-Line Filter with Filter Screen
11. Quick Disconnect with Universal Wall Fitting
12. UWF Restrictor Disks, Red and Blue
9
1
3
4
5
1
2
3
4
6
6
7
8
9
10
11
12
5
6
10
7
12
8
11
2

Polaris 3900 Sport Specifications

General

Type	Pressure-side pool cleaner
Pool Type	In-ground
Number of Jets	3
Booster Pump Required	Yes
Power Source	Booster pump
Warranty	1 year limited
Hose Length	31 ft
Cleaning Coverage	Floor, walls, and steps
Debris Bag	Included