110
MAINTENANCE AND LUBRICATION
Cleaning and Storage
Storage Tips
If your vehicle will be placed in extended or of f season storage,
perform all necessary repairs and thoroughly clean the vehicle. Drain
the recoil housing. Remove the battery and store it in a cool, dry place.
See the battery section beginning on page 102.
Fluid Levels
Inspect the following fluid levels and change if necessary: front
gearcas e; transmission; front hubs; brake fluid (change every two years
or as required if fluid looks dark or contaminated).
Engine
1. Support t he front end of the machine so the engine is level or tilted
slightly rearward.
2. Remove the spark plug, rotate the piston to BDC and pour
approximately two ounces of Premium 4 Synthetic 4-cycle oil into
the cylinder. R einstall t he spark plug.
3. Apply diele ctr ic gre ase to the inside of the spar k plug ca p and install
the ca p onto the plug.
4. Turn the engine over several times, using the recoil starter, to
ensure coverage of piston rings, cylinder walls and crankshaft
bearings.
5. Treat the fuel system with Polaris Carbon Clean.
6. If Polaris fuel system additive is not used, the fuel tank, fuel lines,
and carburetor should be completely drained of gasoline.
To Next Page
Loading...
Need help?
General
