111
MAINTENANCE AND LUBRICATION
Cleaning and Storage
Storage Tips
Engine Anti-Freeze
Test engine coolant strength and change if necessary. Replace coolant
every two years.
Lubricate
Inspect all cables and lubricate with Polaris Cable Lubricant. Follow
lubrication guidelines in the maintenance section of t he service or
owner’s manual to completely grease and lubricate the entire vehicle
with Polaris P remium All Season Grease. Apply Polaris O-Ring Chain
Lube to the drive chain(s).
Storage Area/Covers
Set the tire pressure and safely support the ATV with the tires 1-2” off
the ground. Be sure the storage area is well ventilated, and cover the
mac hine with a genuine Polaris ATV cove r.
NOTE: Do not use plastic or coated materials. They do not allow
enough ventilation to prevent condensation, and may promote
corrosion and oxidation.
To Next Page
Loading...
Need help?
General
