155
Maintenance
Cleaning
Washing the ATV
If a high pressure water system is used for cleaning (not recommended), exercise extreme
caution. The water may damage components and could remove paint and decals. Avoid
directing the water stream at the following items:
• Wheel bearings
• Radiator
• Transmission seals
•Brakes
• Cab and body panels
• Labels and decals
If warning and safety labels are damaged, contact your POLARIS dealer for free replace-
ment.
Grease all zerk fittings immediately after washing. Allow the engine to run for a while to
evaporate any water that may have entered the engine or exhaust system.
To Next Page
Loading...
Need help?
General
