161
Maintenance
Transporting the ATV
1. Stop the engine. Place the transmission in gear. Lock the parking brake.
2. Secure the fuel cap, oil cap and seat. Turn the fuel valve off.
NOTICE: Always tie the frame of the ATV to the transporting unit securely with suitable straps or rope.
The rack, bumper or handlebars do not offer enough support for tie-down while transporting.
3. Wrap the front tie strap through the frame tubes (not through the bumper tubes), or attach
a tie-down hook around each of the tubes.
4. Wrap the rear tie strap around the grab bar.
Step 3
Tubes
Step 3 Step 4
To Next Page
Loading...
Need help?
General
