72
Operation
Pre-Ride Inspection
Failure to inspect and verify that the ATV is in safe operating condition before operating
increases the risk of an accident. Always inspect the ATV before each use to make sure it's in
safe operating condition.
Pre-Ride Checklist
Item Remarks Page
Brake system / lever travel Ensure proper operation 129, 133
Front suspension Inspect, lubricate if necessary 106
Rear suspension Inspect, lubricate if necessary 106
Steering Ensure free operation, lubricate if necessary 134, 136
Tires Check condition and pressure 143
Wheels / fasteners Inspect, ensure fastener tightness; check that
axle nuts are secured by cotter pins
145, 146
Fuel and oil Check and fill as needed 15, 66
To Next Page
Loading...
Need help?
General
