Page 19
English
3. To install a new track, place the inside rib of the track into the groove in the
rst wheel. (See Figure 25).
4. Stretch the track around the second wheel (see Figure 25). Push and
position the rib of the track so that the track is seated properly in the groove
of the wheel.
5. Verify the rib of the track is positioned properly within the groove of each of
the wheels. If necessary, turn the wheels gently to seat track.
Figure 25. Stretch Track Around Wheels
Spare Parts
The complete spare parts list and exploded view is available on the Polaris website.
• USA: www.polarispool.com.
• Canada: www.polarispool.ca
Contact your local maintenance provider to perform diagnostic tests or repairs not
shown in general maintenance.
To Next Page
Loading...
Need help?
General
