Page 15
English
5.4 Programming Cleaning Cycles
You can program up to seven cleaning cycles.
Program cleaning for either seven consecutive cycles or
the same cycle repeated over several weeks
(e.g., every Wednesday and Saturday for three weeks).
1. Choose pool cleaning settings to program.
All models:
Choose
to select either bottom of
pool or bottom plus sides of pool.
9550 Sport/P955:
to select waterline only in
addition to bottom or bottom plus sides options.
to select intensive or
high intensity level cleaning.
to select pool shape.
2. Press
to view currrent programmed
cleaning cycles.
Cycle day and time is displayed for three
seconds.
3. When the cleaning cycle you want to change
is displayed, press and hold
seconds.
NOTE: If the display flashes all zeros, the time has
not been set (new cleaner). Day and time must be set
before you can program cleaning times, see section
5.2 Changing the Clock Day and Time.
4. Press or buttons to cycle through
7 days of the week.
to select.
6. Press or buttons to cycle
through 24 hours.
7. Press
to select.
8. Press or buttons to cycle
10. Press
to select.
11. Press to program an additional cleaning
cycle for a different day OR
Press
to exit the programming menu
Days of the week are lit indicating programs
stored in the control unit memory for that day.
5.5 Canceling Cleaning Cycles
To Cancel an Individual Program:
1. Press
2. Press
or buttons to cycle
through seven (7) days.
NOTE: If the day of the week flashes with no time
displayed, there is no program set for that day.
To Next Page
Loading...
Need help?
General
