BRAKES
6.16
3. Remove the outside dust boot (E).
E
4. Remove the piston and dust seal (F).
F
5. Remove the caliper body bolts (G). Pull the
caliper bodies apart (if necessary).
G
6. Clean the caliper body, piston, and retaining
bracket with brake cleaner or alcohol.
NOTE: Be sure to clean seal grooves in caliper body.
FRONT / REAR CALIPER
INSPECTION
1. Inspect caliper body bore for nicks, scratches or
wear. Measure bore for roundess. Replace if
damage is evident.
Enfocus Software - Customer Support
To Next Page
Loading...
