BRAKES
6.15
to stop machine. Repeat this procedure 10 times,
allowing brakes to cool sufficiently after each
run.
REAR CALIPER REMOVAL
1. Clean caliper area before removal.
2. Using a flare nut wrench, remove the brake lines
(A). Place a container to catch brake fluid
draining from brake lines.
A
3. Remove the caliper mounting bolts and remove
the caliper assembly (B) from the caliper mount.
B
FRONT / REAR CALIPER
DISASSEMBL
Y
A
1. Remove the c--clips (A) from the caliper sliding
bolts.
2. Remove the caliper slide bolts (B), mounting
bracket (C), and brake pads (D).
B
C
D
A
Enfocus Software - Customer Support
To Next Page
Loading...
