EasyManuals Logo

Polaris Ranger 4x4 500 EFI User Manual

Polaris Ranger 4x4 500 EFI
126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #106 background imageLoading...
Page #106 background image
103
MAINTENANCE
Cleaning and Storage
Storage Tips
Clean the Exterior
Make any necessary repairs and clean the vehicle as recommended. See
page 100.
Stabilize the Fuel
1. Fill the fuel tank.
2. Add Polaris Carbon Clean Fuel Treatment or Polaris Fuel Stabilizer.
Follow the instructions on the container for the recommended
amount.
NOTE: Carbon Clean removes water from fuel systems, stabilizes fuel and
removes carbon deposits from pistons, rings, valves and exhaust sys-
tems.
3. Allow the engine to run for 15-20 minutes to allow the stabilizer to
disperse through the entire fuel delivery system.
Oil and Filter
Change the oil and filter. See page 62.
Air Filter / Air Box
Inspect and clean or replace the pre-cleaner and air filter. See page 78.
Clean the air box. Drain the sediment tube.
Inspect and Lubricate
Inspect all cables and lubricate all areas of the vehicle as recommended
in the Periodic Maintenance Chart beginning on page 54.
Battery Maintenance
See pages 97-99 for storage and charging procedures.
NOTICE
Starting the engine during the storage period will disturb the protective film
created by fogging and damage could occur. Never start the engine during
the storage period.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris Ranger 4x4 500 EFI and is the answer not in the manual?

Polaris Ranger 4x4 500 EFI Specifications

General IconGeneral
BrandPolaris
ModelRanger 4x4 500 EFI
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals