EasyManua.ls Logo

Polaris Ranger 4x4 500 EFI

Polaris Ranger 4x4 500 EFI
126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
91
MAINTENANCE
Lights
When servicing a halogen lamp, don't touch the lamp with bare fingers.
Oil from your skin leaves a residue, causing a hot spot that will shorten
the life of the lamp.
Headlight Lamp Replacement
1. Open the hood.
2. Unplug the headlamp
from the wiring harness.
Be sure to pull on the
connector, not on the
wiring.
3. Turn the lamp counter-
clockwise to remove it.
4. Install the new lamp.
NOTE: Make sure the tab on the lamp locates properly in the housing.
5. Reinstall the harness assembly into the headlight assembly.
WARNING
Poor lighting while driving can result in severe injury or death. Headlight and
taillight lenses become dirty during normal operation. Wash the headlights
frequently to maintain lighting quality.
Hot components can cause burns to skin. Do not service the headlamps until
they've cooled sufficiently.
Wiring Harness

Table of Contents

Related product manuals