68
MAINTENANCE
Gearcases
Rear Gearcase
Always check and change the rear gearcase oil at the intervals outlined
in the Periodic Maintenance Chart beginning on page 54.
Refer to the Gearcase Specifications Chart on page 65 for recommended
lubricants, capacities and torque specifications. See page 108 for the
part numbers of Polaris lubrication products.
Oil Check
Maintain the oil level even with the bottom thread of the fill plug hole.
1. Position the vehicle on a
level surface.
2. Remove the fill plug.
Check the oil level.
3. Add the recommended oil
as needed.
4. Reinstall the fill plug.
Torque to specification.
Oil Change
1. Remove the fill plug.
2. Place a drain pan under the
drain plug.
3. Remove the drain plug.
Drain the oil.
4. Clean the drain plug. Reinstall the drain plug. Torque to specifica-
tion.
5. Add the recommended oil.
6. Reinstall the fill plug. Torque to specification.
7. Check for leaks.
8. Dispose of used oil properly.
To Next Page
Loading...
Need help?
General
