31
FEATURES AND CONTROLS
Switches
Ignition Switch/Light Switch (Base Model)
Use the ignition switch to start the engine and to turn the lights on or off.
The key can be removed from the switch when it is in the OFF position.
Ignition Switch (LE Model)
The ignition switch is a three-position, key-operated switch. The key
can be removed from the switch when it is in the OFF position.
Light Switch (LE Model)
The ignition switch key must be in the
ON/RUN position to operate the head-
lights. Press the top of the rocker switch
toward the dash to place the headlights on
high beam. Move the rocker switch to the
center position to place the headlights on
low beam. Press the bottom of the rocker
switch to turn off the headlights.
OFF Turn the key to the OFF position to stop the engine. Electrical
circuits are off.
LIGHTS ON Electrical circuits are on. Electrical equipment can be used.
LIGHTS OFF Electrical circuits are on. Electrical equipment can be used.
START Turn the key to the START position to engage the electric
starter. See page 50 for starting procedures.
OFF The engine is off. Electrical circuits are off, except Acc, 12V.
ON Electrical circuits are on. Electrical equipment can be used.
START Turn the key to the START position to engage the electric
starter. The key returns to the ON position when released.
HIGH
OFF
LOW
To Next Page
Loading...
Need help?
General
