48
OPERATION
Pre-Ride Inspection
Failure to inspect and verify that the vehicle is in safe operating condi-
tion before operating increases the risk of an accident. Always inspect
the vehicle before each use to make sure it's in safe operating condition.
Item Remarks Page
Brake system/pedal travel Ensure proper operation 34
93
Brake fluid Ensure proper level 94
Front suspension Inspect, lubricate if necessary 70
Rear suspension Inspect, lubricate if necessary 70
Steering Ensure free operation 95
Tires Inspect condition and pressure 20
97
Wheels/fasteners Inspect, ensure fastener tightness 97
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 41
73
Coolant level Ensure proper level 84
83
Coolant hoses Inspect for leaks -
Throttle Ensure proper operation 91
Indicator lights/switches Ensure proper operation 31
Air filter, pre-filter Inspect, clean 88-89
Intake pre-filters Inspect, clean 89
Headlamp Check operation, apply POLARIS
dielectric grease when lamp is
replaced
99
Brake light/tail lamp Check operation, apply POLARIS
dielectric grease when lamp is
replaced
101
Seat Latches Push down on both seat backs to
ensure the latches are secure
28
Seat Belts Check length of belt for damage,
check latches for proper operation
29
Cab Nets Check for wear or damage, ensure
proper installation
27
To Next Page
Loading...
Need help?
General
