74
MAINTENANCE
Engine Oil
Oil and Filter Change
Always check and change the oil at the intervals outlined in the Periodic
Maintenance Chart beginning on page 65. Always change the oil filter
whenever changing oil.
The engine drain plug is located on the
bottom of the crankcase.
1. Position the vehicle on a level surface.
Place the transmission in PARK.
Apply the brakes.
2. Start the engine. Allow it to idle for
two to three minutes. Stop the engine.
3. Clean the area around the drain plug.
CAUTION! Hot oil can cause burns to skin. Do
not allow hot oil to contact skin.
4. Place a drain pan beneath engine
crankcase and remove the drain plug.
5. Allow the oil to drain completely.
6. Reinstall the sealing washer on the
drain plug.
Tip: The sealing surfaces on drain plug and crankcase should be clean and free
of burrs, nicks or scratches.
7. Reinstall the drain plug. Torque to 12 ft. lbs. (16 Nm).
To Next Page
Loading...
Need help?
General
