TRADEMARKS
POLARIS ACKNOWLEDGES THE FOLLOWING PRODUCTS MENTIONED IN THIS MANUAL:
Loctite, Registered Trademark of the Loctite Corporation
Nyogel, Trademark of Wm. F. Nye Co.
Fluke, Registered Trademark of John Fluke Mfg. Co.
Mity-Vac, Registered Trademark of Neward Enterprises, Inc.
Torx, Registered Trademark of Textron
Hilliard, Trademark of the Hilliard Corporation
Warn, Trademark of Warn Industries
FOX, Registered Trademark of FOX RACING SHOX
RydeFX, Registered Trademark of ArvinMeritor
Some Polaris factory publications can be downloaded from www.polarisindustries.com, purchased from
www.purepolaris.com or by contacting the nearest Polaris dealer.
REVISION INDEX
REV DATE
CHANGES
R01 9/11/15 Initial Release. RZR S 1000 added for 2016
R02 10/27/2015
Add PU-50658-A matrix to transmission section.
Rear Axle Nut torque changed to 180 ft-lb
Lower rear bearing carrier torque changed to 40 ft-lb + 180°
R03 2/29/2016
Clarified CAN system testing
R04
3/30/2016
Updated Driven Clutch Service procedures with new graphics
4/7/2016
Updated Shock preload information and images. Added mono shock
information
R05 12/06/2016
• Updated Exhaust valve clearance matrix
• Updated intake hose clamp torque
R06 04/25/2017
Increased Oil Filter torque specification
Added new process for selecting/calculating valve tappets
R07 05/11/2017
Corrected CAN System Testing topic
R08 11/21/2017
Added door latch and door adjustment procedures
To Next Page
Loading...
Need help?
General
