ELECTRICAL
10.34
WARN WINCH SWITCH
INSTALLATION
(SPORTSMAN
HUNTER
EDITION)
1. Remove the front (A) and rear (B) bolts from the
master cylinder clamp. Be careful not to lose the
spacers (C).
2. Rotate the mini--rocker switch upward and mount
as shown. Route the wire between the switch
mounting bracket and the master cylinder clamp,
next to the front spacer.
3. Reposition the spacers between the mini--rocker
switch mounting bracket and the master cylinder
clamp and reinstall the bolts to secure the switch.
Torque the rear bolt first, then torque the front bolt.
Torque to 25 in./lbs. (3 N/m).
4. Secure the cables to the handlebars as needed
with the new panduits provided in the toolbox.
C
A
B
To Next Page
Loading...
