Polaris TRAIL BOSS 2003 User Manual

TRANSMISSION
8.4
13. Remove snap ring and washer. Pull down and
rotate shift fork shaft back and forth to remove.
14. Inspect shift fork shaft O-ring. Replace if
necessary. Lubricate O-ring to ease in
reassembly and to protect O-ring during
assembly.
15. Remove input shaft bearing.
16. Inspect gears for galling and wear on teeth and
bearing surface. Replace if necessary.
17. Remove bearing from other end of input shaft.
Remove two snap rings and gear.

Polaris TRAIL BOSS 2003 Specifications

General

Brand	Polaris
Model	TRAIL BOSS 2003
Category	Offroad Vehicle
Language	English