12
2.3 Connecting to Power
Use only the supplied car charger to power up the device and
charge the built-in battery.
1. Connect one end of the car charger to the USB connector of
the device. USB port input: DC 5V / 1A.
2. Plug the other end of the car charger to the cigarette lighter
socket of your vehicle. Once the vehicle engine is started, the
device automatically turns on. Car charger input: DC 12 / 24V.
Note:
1. To use the products of the attached power charger only, please do not use
other brand power charger, in order to avoid equipment burn or cause the
battery explosion.
2. When first use this device, please charging to battery full
3. Please take note if the environment temperature reaches 45°C or above, the
car adapter still can supply power to device, but it may not charge the battery.
This is characteristic of Lithium polymer battery and is not a malfunction.
To Next Page
Loading...
Need help?
General
