3 Using the Device
3.1 Recording Videos
3.1.1 Record videos while driving
When the vehicle engine starts up, the device automatically turns on
and starts recording.
Recording will automatically stop when the engine is switched off.
Note:
On some cars, the recording will continue when the engine is switched off. If this
happens, please manually turn off the cigarette lighter or remove the car charger
from the cigarette lighter.
3.1.2 Emergency Recording
During normal video recording, press the
button to begin emergency recording
mode. The “Emergency” message will be
displayed immediately on the upper left
corner of the screen, and the recorded file
will be
continuous and protected
from
being overwritten.
After complete the emergency recording, it will be back to normal
recording mode.
Note:
1. If the Collision Detection function is enabled and a collision is detected, the
device will automatically trigger the emergency recording feature.
2. The emergency recording file is created as a new file, which will be protected
to avoid being overwritten by normal loop recording. 8 GB (or above) memory
card can save up to 10 emergency video files. The alert message of
“Emergency files are full” will pop up on the screen when the emergency
recording files are full, and the oldest emergency file will be automatically
deleted when a new emergency recording file is created.
To Next Page
Loading...
