5
Notes on Installation
1.
Please measure the front windshield viewing area, make sure not
to block driver's front view, install the device below the rearview
mirror (the central, higher right position of the front windshield).
2.
Make sure that the lens is within the wiping range of the windscreen
wiper to ensure a clear view even when it rains.
3.
Do not touch the lens with your fingers. Finger grease may be left
on the lens and will result in unclear videos or snapshots. Clean the
lens on a regular basis.
4. Do not install the
device
on a tinted window. Doing so may
damage the tint film.
5.
Make sure that the installation position is not hindered by the tinted
window.
6.
Use the products of the attached car charger only, please do not
use other brand power charger, in order to avoid equipment burn or
cause the battery explosion.
Caution
Use the authorized car charger only.
Never disassemble or attempt repair of this product. Doing so
may damage the device, cause electric shock and void your
product warranty.
Never short-circuit the battery.
Set up time and date accurately before you use this device.
Exposing the device to open flames can cause explosion.
Due to local laws and vehicles safety considerations, do not
manually operate the device while driving.
The values displayed in this system, such as speed, position, and
the distance warning to the speed camera set points, may be
inaccurate due to the influence of surrounding environment. They
are for your reference only.
This product is used only for non-commercial use, within the
maximum limits permitted by applicable law. We do not take any
responsibilities for the loss of use of the product.
To Next Page
Loading...
Need help?
General
