Contents [ hide
1 How to use the Polaroid Lab
2 Further Guidance
3 Troubleshooting & FAQ
4 Tips for Making Great
Photos
5 Customer Support
6 Technical Specifications
7 Safety Information
8 File Downloads
9 References
10 Related Manuals
How to use the Polaroid Lab
1. Download the Polaroid App on your phone
You will need the Polaroid Origilals App to use the Polaroid Lab. The App also contains
Tips, Tricks & Tutorials, and Inspiration for more ways to create.
→ polaroid.com/polaroidlab
2. Charge the Polaroid Lab
Important The Polaroid Lab will not be fully charged upon purchase. Make sure that it is fully charged before
first use. To charge the Polaroid Lab, plug the USB charging cable into the Micro-USB slot on the Polaroid
Lab’s back panel and the other end of the cable into a charger, such as a phone adapter or your computer’s
USB slot. The LEDs next to the slot light up to show the current battery level, four lit LEDs mean fully charged. If
the Polaroid Lab is connected to a charger and is fully charged then all charging LEDs will be off. A full charge
usually takes about 2 hours through a wall socket with a phone adapter or up to 4 hours through a computer’s
USB slot.
A fully-charged Polaroid Lab will have enough power to shoot 100 packs of film, depending on usage.
Remember to turn off the Polaroid Lab after use to conserve battery life.
To Next Page
Loading...
Need help?
General
