• Setting Auto Power Off
The camera is equipped with a power saving operation to conserve battery
power.
You can change the power saving setting with the following steps:
1. Follow the guidelines in “Setup Menu” on page 17 to access the SETUP
menu.
2. Select the AUTO POWER OFF option using
the down button.
DATE/TIME
AUTO POWER OFF
BEEP SOUND
VOLUME
VIDEO SYSTEM
1/3
3. Press the right button to access the AUTO
POWER OFF submenu.
4. Specify the automatic power off period
using the up or down button. Press the
button or right button to con rm
your choice and exit from the menu
window, press the left button to give up
con rmation and return to main menu.
OFF
1 MINUTE
3 MINUTES
1 MINUTE / 3 MINUTES The camera is designed to switch off
automatically to save battery life after the
speci ed period of inactivity.
OFF The power saving function is not active.
NOTE:
Auto power off is automatically disabled under any one of the following
conditions:
• While the camera is recording a video clip.
• While the camera is running a slide show.
To Next Page
Loading...
