6 Operating instructions
Note:
The display disappears about every 40 seconds.
Lightly
press
the
MODE
or shutter button to make it reappear.
To turn off the audio signals:
1
Press the
MODE
button until you see only
the audio signals symbol:
2
Press the
up
(
Z
) or
down
(
X
)
control
button
once
to remove the indicator bar
and turn the signals off:
3
Press the
MODE
button
once
to return to
the full display. You can now take a
picture:
To return the camera to fully automatic
operation, press the
A
uto reset button.
Electronic flash
The flash automatically begins to charge
every time you
•
load film into the camera, or
•
press the shutter button halfway, or
•
take a picture, or
•
open the camera.
When the green light comes on, the flash
is ready to fire. The light will stay on for 20
to 30 seconds.
If you wish to take a picture and the green
light has gone off, press the shutter button
halfway
or press the
MODE
button. You
can take the picture when the green light
comes on again.
The electronic flash is designed to be used
for every picture - indoors and outdoors.
Every time you take a picture, your
camera’s built-in electronic flash blends
light from the scene with just enough
flash to give you the best possible picture.
In bright sunlight,
your camera blends the
sunlight with just the right amount of flash
to soften shadows and to reveal the facial
details you expect to see in the picture.
In the shade,
the flash automatically sup-
plies the additional light needed to
produce a pleasing photograph.
To Next Page
Loading...
Need help?
Camera Specifications
Weight and Dimensions
