Features 11
Note: The display disappears about every 40 seconds. Lightly press
the MODE or shutter button to make it reappear.
For time exposures, the camera must be
placed on a steady support, such as a
tripod.
Turn the flash off for better time-exposed
photographs.
Programmed time exposures
With this feature, you can program the
shutter to stay open, from 1 second up to
2 minutes, to record time exposures.
To program a exposure:
1 Press the MODE button until you see only
the time exposure symbol:
2 Press the up (Z) control button once to
turn on the programmed time exposure
system:
3 Press the MODE button once. The :01
second display will start flashing:
4 You must now decide how long you want
the exposure to be.
When you press the up (Z) control
button, the time will increase in 1 second
increments up to 2 minutes. When you
press the down (X) control button,
the time will decrease in 1 second
increments.
To Next Page
Loading...
