Features 9
Note:
The display disappears about every 40 seconds.
Lightly
press
the
MODE
or shutter button to make it reappear.
Photographing in natural light
To eliminate flash glare and to take
advantage of natural light situations, you
can turn off the flash when taking
pictures indoors or outdoors.
To turn the flash off:
1
Press the
MODE
button until you see only
the electronic flash symbol:
2
Press the
up
(
Z
) or down (X) control
button once to remove the indicator bar
and turn off the flash:
3 Press the MODE button once to return to
the full display. You can now press the
shutter button to take a non-flash picture:
To return the camera to fully automatic
operation, press the Auto reset button.
Manual focusing
You can turn off the autofocus system
and program the distance to your subject
by using the manual focusing feature.
This allows you to photograph through
glass, screens, and fences. When you
shoot through glass, you may wish to
turn off the flash to eliminate glare. See
Photographing in natural light
.
To use this feature:
1 Measure the distance to your subject.
2 Press the MODE button until you see only
the autofocus symbol:
Features