16 Features
Note: The display disappears about every 40 seconds. Lightly press
the MODE or shutter button to make it reappear.
2 Press the up (Z) or down (X) control
button once to turn on the feature.
You will see 12 seconds and a self-timer
symbol appear. The number to the right
shows how many pictures you have left
in the film pack:
3 Press the MODE button once. The 12
second display will start flashing:
You must now program when the
camera will take each picture.
To increase the time, press the up (Z)
control button. The time increases in 1
second increments up to 2 minutes. The
time increases in tenths of a minute from
2 to 19.9 minutes.
If you want less than 12 seconds, press
the down (X) control button. The time
decreases in 1 second increments down
to 3 seconds.
If, for example, you choose 30 seconds,
30 seconds passes before each picture is
taken, including the first picture.
4 When you have selected the time you
want (for example, 30 seconds), press
the
MODE button once.
The number of pictures left in the film
pack will start flashing: