171Last Page
Operating Your TV
OSD Menu
1. Advanced Picture Settings: Press button to enter the Advanced Picture Settings.
Dynamic Contrast: Select the dynamic contrast mode
between Off, Low, Medium and High.
Film Mode: Activate or deactivate the Film Mode.
Noise Reduction: If the broadcast signal receiver is weak
you can select the DNR option to reduce the video noise
level between Off, Low, Medium, High.
MPEG Noise Reduction: Select the MPEG Noise
Reduction option to reduce the picture noise level
between Off, Low, Medium and High.
2. Sound Menu
Description
Sound Settings: Press to enter the Sound Setting
menu.
Sound Mode: Select your desired picture mode as follows:
Dynamic, Standard, Soft and User.
You may select the sound mode directly by pressing the
SOUND button on the remote control.
Bass: Low frequency intensity
Treble: High frequency intensity
Balance: Left and right stereo audio channels balance.
Surround Mode: Activate or deactivate the Surround
function.
AVL: Activate or deactivate the Auto Volume Limited function.
Analog Sound: Select the Analog Sound mode between Stereo, Mono and SAP.
Digital Sound: Select the Digital Sound Language.
Digital Audio Output: Select the Digital Audio Output mode between PCM, RAW and Off.
To Next Page
Loading...
Need help?
General