73Polaroid x530 Digital Camera User Guide
www.polaroid-digital.com
Connect the Card Reader to Your Computer
CARD READER
Connect the USB port on the card reader to the
marked socket on your computer as illustrated.
1. The Status LED will light up and remains steady on, indicating a
successful connection with the computer.
2. An interface “Found New Hardware” will show on the computer
desktop.
3. A removable disk drive will be installed onto your computer
automatically.
IMPORTANT!
To properly disconnect the card reader from the computer, click on the
connection icon on the tool bar. A “Stop USB Mass Storage Device - Drive (E)”
indicator will appear. Click this indicator and a “Safe To Remove Hardware”
interface will appear. Click “OK” and the Status LED will turn off. Plug the card
reader off the computer.
To Next Page
Loading...
Need help?
General
