Transferring Pictures and Video Clips via the Card Reader
NOTE:
• ArcSoft PhotoStudio software does not support the X3F le. Please use
the Polaroid PhotoLab to open the X3F le and save it in the JPEG or TIFF
format. Then it can be edited by the ArcSoft PhotoStudio software.
• ArcSoft PhotoStudio is a photo-editing software for a wide range of image
formats (JPEG, TIFF, BMP, GIF, and so on), but not for the X3F format. For
X3F raw les, the Polaroid PhotoLab software can edit them, and change
them from X3F to either JPEG or TIFF format for further edition using
PhotoStudio software.
For Windows® Users:
PC
1. Insert the SD card into the card reader.
2. Connect the card reader to your computer.
3. Double click on “My Computer” on your PC desktop and you will see a
“Removable Disk” drive.
4. Double click on “Removable Disk” —> double click “DCIM” —> double
click any directory folder under “DCIM”.
5. All the pictures and video clips are in the directory folder. Highlight the
pictures and video clips, and drag them to a folder of your choice. You
can also create sub-folder to group them or use the ArcSoft software to
edit and manage the pictures (JPEG) or video clips, or use the Polaroid
PhotoLab to edit the X3F le.
For Macintosh Users:
Mac
1. Insert the SD card into the card reader.
2. Connect the card reader to your computer.
3. The systems will automatically recognize the MASS STORAGE drive.
(System will automatically create a Mass Storage named “unlabelled”)
4. Double click the folder “unlabelled” to enter sub-folder “DCIM”.
5. Double click the folder “DCIM” and then any sub folder inside.
6. You can copy the pictures and video clips from this directory folder and
paste to the hard disk.
To Next Page
Loading...
Need help?
General
