8
1.4 Clip installation/removal
The РМ1401MA comes with a clip, which may be used to fasten the instrument to
waist belt or pocket. The clip may be easily installed and removed from the instrument by
using a screwdriver or similar tool as shown on the figures below:
1.5 Battery installation
РМ1401MA is packaged without a battery installed. To install the battery, open the
battery compartment cover located on the right side of the instrument with a coin or
screwdriver. Once opened, insert a single AA battery loading the positive (+) end first.
Reinstall the battery cover and tighten it. If the battery is installed properly, the unit
will turn ON automatically, the LCD screen will display all segments for about 1 second and
then the unit will perform self-test and initiation procedures.
1.6 Delivery kit
The following items are included in the PM1401MA standard delivery kit:
• The PM1401MA instrument;
• External vibrator with wrist band;
• AA-LR6 Battery;
• CD-ROM with software;
• Operation Manual;
• Package.
To Next Page
Loading...
