EasyManua.ls Logo

Poly Blackwire 3300 Series User Manual

Poly Blackwire 3300 Series
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Blackwire 3300 Series
User Guide
PLANTRONICS + POLYCOM. NOW TOGETHER AS
Question and Answer IconNeed help?

Do you have a question about the Poly Blackwire 3300 Series and is the answer not in the manual?

Poly Blackwire 3300 Series Specifications

General IconGeneral
TypeWired
Wearing StyleOver-the-head
ConnectivityUSB-A, USB-C
Frequency Response20 Hz - 20 kHz
CompatibilityMac

Summary

Overview

Setup and software

Power and setup

Connect headset to computer or mobile device via USB-A/USB-C or 3.5mm connector.

Load software

Download Plantronics Hub for Windows/Mac to manage settings and enable call control for softphones.

Fit

Adjust the headband

Lengthen or shorten the band for comfortable fit, ensuring cushions cover the center of your ears.

Position the boom

Rotate the boom to align with your mouth. Can be worn on left or right side. Caution: only rotate up to 180°.

Adjust the boom

Gently bend the boom in or out to be approximately two finger widths from the corner of your mouth.

Basics

Make/take/end calls

Use headset button or softphone to answer, end, redial, or hold calls. Call control depends on softphone compatibility.

Volume

Adjust listening volume using the up/down buttons. Adjust headset microphone volume via softphone settings.

Mute

Briefly press the mute button on the inline controller to mute/unmute the microphone during a call.

Troubleshooting

Headset

Addresses common headset issues like noise, no audio, muffled audio, distorted sound, echo, and non-functional controls.

Support

Related product manuals