EasyManua.ls Logo

Poly Savi 7220 Office - Fit and Charge; Charge Your Headset; Battery

Poly Savi 7220 Office
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
To position the microphone on the right or left side, rotate the microphone boom up and over.
Gently bend the boom so it is approximately 2 finger widths from the corner of your mouth.
Place the headset in the charging cradle. The charging LED flashes when charging the headset and
remains steady when the headset is fully charged. Charge for at least 20 minutes prior to the first
use.
This product has a replaceable battery. To ensure replacement batteries meet Plantronics high
quality standards and for optimal performance, only use replacement batteries provided by
Plantronics.
Low battery warning
If you are on a call and the headset battery is critically low, you will hear a repeated single low tone
every 15 seconds indicating that the battery is low. You should recharge the headset immediately
or swap the low battery for a fully-charged battery.
If you are not on a call and press the call button, you will hear three low tones if the battery is
critically low. You should recharge the headset immediately or swap the low battery for a fully-
charged battery.
Fit and charge
Wear on the right or left
Charge your headset
Battery
11

Other manuals for Poly Savi 7220 Office

Related product manuals