Change the voice prompt language on your headset in Poly Lens Desktop App.
There are 3 audio modes: wideband stereo (default), wideband (high quality telephony)
and multimedia (high quality listening).
To optimize your audio quality for your activity, with the system idle, press the headset
Mute button for 4 seconds. The base cycles through the modes with each 4 second press.
The base blinks yellow for wideband stereo, green for wideband and red for multimedia
mode.
The headset and base that came in the box are subscribed (connected) to each other.
However, if you wish to use a new headset or need to restore subscription to your current
headset (base subscription button is red), the units can be subscribed to each other by the
following methods.
The subscription button is below the Bluetooth button on the front of the base.
Base Subscription Button LED
Base Subscription LED
Base Status
Flashes green and red Primary headset subscription mode
Solid green Primary headset subscribed to base
Solid yellow Active conference call with guest headsets
Solid red No headset subscribed
Flashes green 3X, the yellow 2X Security level changed from enhanced to
standard
Set the range
Changing the range can help with PC audio quality, improve user density or restrict range
of users.
You can adjust the range setting in Poly Lens Desktop App.
Setting
Range
High (Default) up to 300 ft.
Medium up to 150 ft.
Low up to 50 ft.
Automatic secure subscription
With your system idle, docking a new headset automatically subscribes it to the base,
making it the primary headset. The base subscription LED blinks green/red during
subscription mode and remains green when the new subscription is established.
More Features
Change voice prompt
language
Optimize audio quality
Base Subscription
Button
15
To Next Page
Loading...
