Poly Savi 8220 UC User Manual

Using the diagram, connect your headset system.
Choose a desk phone setup A, B or C and connect cables.
A Desk phone (standard)
USE
• Connect one end of the telephone interface cable to the back of the base
• Disconnect the handset coil cord from the base of the desk phone and re-connect it to the
telephone interface cable junction box.
• Finally connect the remaining end of the telephone interface cable into the open handset port
on the desk phone.
NOTE If your phone has a built-in headset port, you should only use the headset port if you will
not be using the HL10 lifter. In this configuration, you must press both the headset button on your
phone and the call control button on the headset to answer or end calls.
Hook up your system
Desk phone setup details
6

Poly Savi 8220 UC Specifications

General

Connectivity	USB-A, Bluetooth
Range	Up to 590 ft/180 m (line of sight)
Speaker Frequency Response	20 Hz - 20 kHz
DECT Security Certification	Yes
Wireless Range	Up to 590 ft/180 m (line of sight)
Earpad Material	Leatherette
Warranty	2 years
Wireless Technology	DECT 6.0
Noise Cancelling	Yes
Wearing Style	Over-the-head
Charging Time	3 hours
Microphone Frequency Response	100 Hz - 8 kHz
Hearing Protection	SoundGuard DIGITAL
Weight	160 grams
Compatibility	PC, Mac
Microphone	Noise-canceling microphone with close conversation limiting
Battery Life	Up to 13 hours (talk time)