Fit and charge
Customize Your Headset
Optimize the comfort and fit of your headset.
Adjust the Headband
1 To adjust the headband, lengthen or shorten the band until it fits comfortably.
Position the earcups so that the foam cushions sit comfortably over the center of
your ears.
2 Position the stabilizer T-bar above your ear, if applicable.
Adjust the Boom
For optimum audio, bend the boom so it is approximately two finger widths from the
corner of your mouth.
Note: For true stereo listening when wearing the boom on the left, adjust the wearing
preference setting in Poly Lens Desktop App.
Charge your headset
Place the headset in the charge cradle. The headset charging LED flashes when charging
the headset and turns off when the headset is fully charged. Charge for at least 20
minutes prior to the first use. A full charge takes up to 3 hours.
Talk Time
With a full charge, the headset provides up to 13 hours of talk time.
Headset battery status
Determine your headset battery status:
• Listen to the voice prompts after powering on the headset
9
To Next Page
Loading...
