Name: Poly Studio X50
Brand: Poly
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Using the Poly Control App

Topics:

▪ Control the System with the Poly Control App

The Poly Control App enables you to control a video system using a personal device, such as your mobile

device or computer.

After you connect your personal device to the video system, you can place and manage calls, control

camera settings, and interact with shared content.

The following features aren’t available on the computer or mobile device controlling the system:

▪ Device mode

▪ Environment

▪ System settings (only system information displays)

Control the System with the Poly Control App

You can use the Poly Control App on your computer or mobile device to control a video system.

You must be in the room with the video system and connect the mobile device to the same wireless

network as the system to use the Poly Control App.

Procedure

1. In a web browser on your computer or mobile device, enter https://<systemIPaddress>/

control.

The website displays with the system’s room name and IP address.

2. Select Connect.

3. On your computer or mobile device, enter the four-digit code that displays on the system monitor.

Your computer or mobile device displays a user interface similar to the video system. You can then

use your personal device to control the system.

Other manuals for Poly Studio X50

Questions and Answers:

Need help?

Do you have a question about the Poly Studio X50 and is the answer not in the manual?

General