To check the battery status of your speakerphone, slide the power button to the right and release.
LED bar Battery status
Solid white Battery full
Solid white Battery high
Solid white Battery medium
Solid red Battery low
Red flashes Battery critical
Charge the speakerphone via USB using your computer or a USB AC adapter (not provided). The
LED bar pulses while charging and turns off when fully charged. Allow 4 hours for a full charge.
With the speakerphone powered on, charge your phone by connecting your phone's charge cable
to the speakerphone USB port (cable not provided).
Charge
Check battery status
Battery status LEDs
Charge
Charge your mobile phone
5
To Next Page
Loading...
