Poly Voyager 4300 UC Series User Manual

3 Select “Poly V43XX Series.”
Once successfully paired, you hear “pairing successful” and the headset LEDs stop flashing.
NOTE Your headset can pair with up to 8 devices but only maintain 2 connections
simultaneously; this includes the Bluetooth adapter.
Typically, your USB adapter is pre-paired to your headset. In the event that your adapter is
disconnected or bought separately, you will need to pair the adapter to your headset.
1 Insert the high-fidelity Bluetooth USB adapter into your laptop or computer and wait for
your computer to recognize it.
2 Put your headset in pair mode.
3 Put your Bluetooth USB adapter into pair mode by selecting "Pair" in Poly Lens App. Your
adapter flashes red and blue.
Pairing is successful when you hear "pairing successful" and "PC connected" and the
Bluetooth USB adapter LED is solid.
Slide and hold the headset Power
switch away from the off position until the LEDs flash
red and blue.
Pair USB adapter
again
Pair mode
6

Poly Voyager 4300 UC Series Specifications

General

Wearing Style	Over-the-head
Talk Time	Up to 24 hours
Speaker Frequency Response	20 Hz - 20 kHz
Weight (Binaural)	150 grams
Bluetooth Profiles	A2DP, AVRCP, HFP, HSP
Warranty	2 years
Battery Life	Up to 24 hours
Microphone	Noise-canceling
Compatibility	PC, Mac, Mobile
Weight	150 grams
Charging Time	Up to 1.6 hours
Microphone Frequency Response	100 Hz - 8 kHz
Hearing Protection	SoundGuard DIGITAL
Wireless Range	Up to 50 m / 164 ft