Poly Voyager 4300 UC Series User Manual

To position the microphone on the right or left side, rotate the microphone boom up and
over. Gently bend the boom so it is approximately 2 finger widths from the corner of your
mouth.
Charge your headset using the USB cable or the charge stand (select models only). The
headset LEDs flash when charging. It takes approximately 90 minutes to fully charge your
headset. The LEDs turn off once charging is complete.
NOTE The USB cable and charge stand (select models only) plug into a computer or wall
charger's USB port.
USB cable
Charge stand (select models only)
Headset LEDs What they mean
Off Charging complete
Battery high
Battery medium
Battery low
Battery critical
Check your headset battery status:
• View status in Poly Lens Desktop App
• With headset inactive, slide and release the Power switch away from the off position.
Listen to the voice alert or observe the headset LEDs.
Fit and charge
Wear on the right or left
Charge
Check headset battery
status
7

Poly Voyager 4300 UC Series Specifications

General

Wearing Style	Over-the-head
Talk Time	Up to 24 hours
Speaker Frequency Response	20 Hz - 20 kHz
Weight (Binaural)	150 grams
Bluetooth Profiles	A2DP, AVRCP, HFP, HSP
Warranty	2 years
Battery Life	Up to 24 hours
Microphone	Noise-canceling
Compatibility	PC, Mac, Mobile
Weight	150 grams
Charging Time	Up to 1.6 hours
Microphone Frequency Response	100 Hz - 8 kHz
Hearing Protection	SoundGuard DIGITAL
Wireless Range	Up to 50 m / 164 ft