More Features
Customize your headset
Configure your Custom button feature in Poly Lens App. Download: poly.com/lens.
ANC/Transparency mode is the default feature when you tap the right earcup with two
fingers for 2 seconds.
Choose from:
• ANC/Transparency mode (default)
• Check device status
• Mobile calls only: Redial
• Mobile calls only: Launch default voice assistant (Siri, Google Assistant)
Corded mode (audio over USB)
If your headset battery is depleted or a corded connection is required and/or preferred,
use one of the supplied USB cables to stream audio to your headset.
Your headset is supplied with the following USB cables:
• USB-C to USB-A or USB-C to USB-C
• USB-C to 3.5mm
Note: Your headset battery charges while in corded mode when connected with the
USB-C to USB-A or USB-C to USB-C cable. The 3.5mm cable does not charge your
headset battery.
1 Disconnect your Bluetooth USB adapter from your computer if connected.
2 Connect your headset directly to your computer with one of the provided USB cables.
3 Power off your headset to use density-friendly corded mode.
16
To Next Page
Loading...
Need help?
General