Poly VVX 450 Series User Manual

3
Poly VVX 450 Series Quick Reference cont.
Warm Transferring Calls
A warm transfer (attended) allows Users to speak privately with the receiving party
before transferring the call. A warm transfer also confirms the availability of the
receiving party.
1. During an active call, press the Transfer button
2. Dial the phone number or extension .
3. After the receiving party answers the call, press the Transfer button or simply hang up.
Blind Transferring Calls
A blind transfer (unattended) allows Users to send calls to an alternate extension
or phone number without waiting for an answer or confirming the availability of the
receiving party.
1. During an active call, press the BlindX soft key .
2. Dial the phone number or extension .
3. Press the Enter soft key
Transfer a Call to Voicemail
Transfer directly to someone’s voicemail by transferring to **<extension#>.
Checking Voicemail
1. To check your mailbox from your phone, press the Messages button. If you wish to
check your messages from another NocTel phone, dial *15 on the keypad.
2. Follow the menu prompts to access your voicemail.
Initiating a Conference Call
1. Establish your first call.
2. Press the Conference soft key; the party you have been speaking to will be put on
hold and you will hear the dial tone.
3. Dial an additional contact and wait for them to answer so you can notify them that
you are bringing them into a conference call.
4. Press the Conference soft key again; all parties are now on the call.
Note: If the party doesn’t answer or doesn’t want to participate in the conference call,
press “End Call” and you will be returned to the original caller.
Forwarding Calls on an Extension
1. With the handset on the hook dial *72 followed by the 10-digit number.
(*72XXX.XXX.XXXX)
2. The phone will call the provided number and enable call forwarding once the end user
has picked up.
After the initial setup, use *73 to deactivate forwarding.
Note: You can use *72 alone to enable forwarding again to the same number that you
previously entered.

Poly VVX 450 Series Specifications

General

Protocols	SIP
Opus Codec	Yes
Wall Mountable	Yes
Audio Features	Acoustic Clarity Technology
Lines	12 lines
Network	Ethernet 10/100/1000 Mbps dual port
Connectivity	RJ9 headset port
Power	IEEE 802.3af Power over Ethernet (PoE)
Security	Transport Layer Security (TLS)
USB Ports	Two USB ports (2.0 compliant)
Supported Codecs	G.711, G.722, G.729, Opus
Weight	2.2 lbs