Polycom 6000 - Page 52

Note
You may want to go to the Contact Directory to see if the contact
was saved correctly and to add any missing contact information.
To update missing contact information, see Adding Contacts
Manually (step 3) on the “Adding Contacts Manually” page.
Adding Contacts from Call Lists
You can save call information from a call list to your Contact Direc
-
tory.
To add a contact to the Contact Directory from a call list:
1. Use one of the following:
To select a call list, press , and then select Features >
Call Lists > Missed Calls, Received Calls, or Placed Calls.
Or
To quickly see a list of missed calls, press from the idle
screen.
2. Scroll to the contact’s call.
To scroll through a list of contacts, use the * key to Page
Up and the # key to Page Down.
To save the contact to your Contact Directory, press the
Save soft key.
The following gure shows the message that displays
when you save a contact to your Contact Directory.
3. If the contact already exists in your Contact Directory,
“Contact already exists” displays.
4. Press to return to the idle screen.
52