EasyManuals Logo

Polycom CX5100 User Manual

Polycom CX5100
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
Polycom CX5100 Unified Communication Station User Guide
Polycom, Inc. 17
To update the software using a USB flash drive:
1 Obtain the software update package from your network administrator, and copy the software to a
USB flash drive formatted as FAT32. Make sure that there is only one software update package on
the flash drive.
2 Connect the drive to the USB 2.0 port on the tabletop unit or to the USB 3.0 port on the power data
box, as shown in the following figure. The system detects the drive automatically and starts the
update within 30 seconds.
Location of the USB 2.0 connectors
Important Notes About Installation
The indicator lights begin to flash indicating that the update has started. The
system reboots several times during the update, and the indicator lights flash in
several different patterns.
The update can take up to 40 minutes to complete. During this time, the system
reboots several times.Make sure that you do not power the system off during an
update. Wait for at least 40 minutes to make sure the update has completed.
The update is complete when the indicator lights stop flashing for at least 30
seconds.

Other manuals for Polycom CX5100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polycom CX5100 and is the answer not in the manual?

Polycom CX5100 Specifications

General IconGeneral
Product typeGroup video conferencing system
Product colorBlack
Number of persons- person(s)
Megapixel2 MP
Sensor type-
Image sensor size- \
Supported video modes1080p
Supported graphics resolutions352 x 288, 640 x 480 (VGA), 1056 x 144, 1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Frequency range160 - 22000 Hz
Storage temperature (T-T)-40 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)15 - 85 %
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (typical)110 W
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports1
Ethernet LANYes
Ethernet LAN data rates10, 100, 1000 Mbit/s
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth325 mm
Width369 mm
Height348 mm
Weight2300 g
Package depth430 mm
Package width520 mm
Package weight9070 g

Related product manuals