Polycom EagleEye Director - Setting Up Volume Control Events

10 
 
Figure 15 - The fader min value of the Amplifier channel (left) and setting the value of the fader min on the ToLocalRoom group (right).
SoundStructure Volume Control Events
Next,let’sreviewtheEventsthatareassociatedwiththisprojectandensurethattheaudioleveltotheEagleEye
DirectorstayssynchronizedwiththeaudiolevelsenttoAmplifier.
OntheeventspageshowninFigure16,thereisadefaulteventcalled_PolycomHDXtoSSTVolumethat
mapsthe
volumefromtheHDXcodec,usingthecl ink_volumeparameter,tothefadervalueoftheAmplifierchannel.Tokeepthe
leveloftheAmplifierandEagleEyeoutputsthesame,editthiseventbydoubleclickingintheeventandchangethe
AmplifieroutputtotheToLocalRoomoutputasshown
inFigure17.

Figure 16 - The default events for this project with the volume event highlighted.