Polycom EagleEye Director - Saving the SoundStructure System Project

12 

Figure 19 - The wiring page for the designed system with the outputs expanded.
Ifthiswiringdoesnotmatchhowyouwouldliketoconnectthesystem,youcanclickanddragaudiochannelsonthe
wiringpagetomovetodifferentoutputstomatchyourdesired wiring.Inthisexample,thewiringmatchesourdesired
systemandthereforenofurtherchangesarerequired
onthewiringpage.
Saving the SoundStructure System Project
Oncetheconfigurationchangeshavebeenmade,itisimportanttosavetheprojecttodisktoensurethechangesare
savedtothefilethatwillultimatelybeuploadedtotheSoun dStructuresystem.Tosavethefile,navigatetotheFile
menuandselectSave
Project1asshowninFigure20.

Figure 20 - Navigating to the File Save menu.
NextenterthefilenameoftheprojectandclickSaveasshowninFigure21.
