Polycom EagleEye Director - Page 5

5 
2. Next,selectanotherstereoamplifieroutput,renamethechannelto“EagleEye”fortheEagleEyeDirectorand
selectAddassummarizedinFigure6.

Figure 6 - Add an amplifier channel and rename EagleEye in step 2 of creating a SoundStructure Project by following the numbered
steps.
TheresultingchannelsshownintheChannelsDefinedsectionareshowninFigure7.

Figure 7 - The result after clicking Add to create the EagleEye audio channel.