Polycom EagleEye Director - Matrix and Volume Control Settings; Configuring Matrix Settings for Audio Routing

6 
Step 3: Select the Equipment
ClickNexttocontinueandselectthedefaultSoundStructuredevices.InthiscaseaSoundStructureC8deviceisrequired
toimplementthesystemasshowninFigure8.YoucanmanuallyselectadifferentdeviceorsimplyclickNexttogetto
thelaststep.

Figure 8 - Step 3 automatically selects the equipment required to implement the design.
Step 4: Finish the Project
ClickFinishtocreatetheofflineprojectasshowninFigure9.

Figure 9 - Select ‘Work offline’ in the final step of the project to make it easier to make the remaining project changes.
Matrix Settings
NavigatetotheMatrixpageofthedesignedprojecttoreviewthesettingsasshowninFigure10.Asshowninthisfigure
theremoteaudiofromthePolycomHDXInchannelisroutedtoboththeAmplifierandtheEagleEyeoutputs.Thebold
crosspointvaluesindicatethematrixcrosspointsare
unmutedandthevalueindicatesthegainwith0dBindicatingthat